Locks Change Etobicoke

Break-In Lock Repair Toronto: What to Do After a Burglary (2026)


Break-in lock repair in Toronto is one of the most urgent calls a locksmith gets. You come home or open the shop in the morning and find a forced door, a snapped cylinder or a lock that no longer turns. It is stressful, and in that moment it is hard to think clearly about what to do first. This guide walks you through it step by step: what to do in the first hour, how break-in damage to locks usually happens, what can be repaired, when locks should be replaced and how to make the door stronger so it does not happen again.

Xpress Locksmith provides emergency locksmith service in Toronto and across the GTA, around the clock. If your door will not lock right now, call (416) 848-1109 and we will send a technician.

Break in lock repair Toronto deadbolt replacement
A new deadbolt is often the first step after a forced entry.

What to Do Right After a Break-In

Before you think about locks, think about safety and evidence. Here is the order we recommend.

  1. Do not go inside if you think someone may still be there. Step away and call 911.
  2. Call the police to report the break-in, even if nothing obvious was taken. A police report is usually needed for insurance. The Toronto Police Service also has practical guidance on break and enter prevention that is worth reading once things settle down.
  3. Take photos of the door, frame, lock, strike plate and any marks on the cylinder before anything is touched or repaired.
  4. Call your insurer and ask what documentation they need for the door and lock repair.
  5. Secure the door. If it will not lock, call a locksmith for an emergency repair or a temporary secure fix the same day.
  6. Think about keys. If keys, a garage remote or a bag with an ID card were taken, the locks should be rekeyed or changed even if they were not damaged.

Why you should not wait to fix the lock

A door that has been forced once is an easy target. Burglars sometimes return to a property they know is unsecured, especially if they saw items they could not carry the first time. Getting the door locking properly the same day is the single most important step after the police have finished.

How Burglars Defeat Locks and Doors

Understanding how the damage happened tells us what needs to be repaired. In Toronto, we see a handful of common methods again and again.

Kick-ins and shoulder attacks

The most common method by far. A hard kick near the lock splits the wooden door jamb where the strike plate is screwed in. The deadbolt itself is often fine, but the wood around it gives way. The fix involves the frame and strike as much as the lock. If the door or frame is badly damaged, our door repair service can rebuild it.

Cylinder snapping and pulling

Some locks, especially low-quality euro-profile cylinders and cheap deadbolts, can be snapped or pulled with tools. The outside part of the cylinder breaks off and the mechanism is turned. This leaves a lock that is clearly broken and needs replacement with a stronger, anti-snap cylinder.

Anti snap high security cylinder for Toronto homes
Anti-snap cylinders are designed to resist snapping attacks.

Prying

A flat bar is pushed between the door and the frame and levered until the latch or bolt slips out. Prying leaves dents and gouges in the door edge and frame and often bends the latch or strike. Doors with gaps around the lock are more vulnerable to this.

Lock picking and bumping

Less common in typical burglaries, but it happens. These methods often leave no obvious damage, which is why some break-ins are only discovered when items are missing. If you suspect a lock was manipulated, it is wise to replace it with a higher security lock.

Breaking glass near the lock

Doors with glass panels or sidelites close to the lock can be broken and opened from the inside. A double-cylinder deadbolt or security glass can help in some situations, though fire safety rules about quick exit from homes should always be considered.

Break-In Lock Repair: What Can Be Fixed and What Must Be Replaced

After a forced entry, our technician will inspect each part of the locking system. Here is what usually happens.

Deadbolts

If the deadbolt still turns smoothly and the bolt extends fully, it may only need a new strike and longer screws. If the cylinder is snapped, the bolt is bent, or the lock feels rough, it should be replaced. Many homeowners take the opportunity to upgrade to a higher security deadbolt. See our page on high security locks in Toronto.

Knob locks and lever handles

Entry knobs and levers often get twisted or broken in an attack. These are usually replaced rather than repaired. If you want the new hardware to work with your existing keys, it can be keyed alike.

Mortise locks

Mortise locks are common on older Toronto homes, apartment buildings and commercial doors. They are usually tough, but a heavy attack can damage the case, the cylinder or the strike. Many mortise locks can be repaired with replacement parts, which can save money compared to a full replacement.

Mortise lock repair after break in Toronto
Mortise locks can often be repaired with new parts.

Strike plates and the frame

The strike plate is the metal plate on the frame that receives the bolt. After a kick-in, it is almost always damaged or torn out. We replace it with a heavy-duty strike secured with long screws into the wall stud behind the frame. If the jamb is split, it needs repair or reinforcement before a new strike will hold.

Commercial door locks

Businesses face different attacks: prying on aluminum storefront doors, forcing back doors, and attacking padlocks and hasps. Commercial locks, exit devices and storefront deadlocks often need specialist parts. Our commercial locksmith team carries common commercial hardware and can secure most storefronts on the first visit.

Commercial glass door lock repair after break in
Storefront locks need commercial hardware and careful alignment.

Rekey or Replace After a Break-In?

If your locks were not damaged but keys were stolen or you are not sure who has access, rekeying may be all you need. Rekeying changes the pins inside the lock so old keys stop working, and it costs less than replacing the hardware. If the lock was damaged, worn or low quality, replacement is the better choice. We explain the difference in detail in our guide on whether to rekey or change locks in Toronto.

  • Rekey when locks are in good condition and you just need to cancel old keys.
  • Replace when the lock is snapped, bent, rough or simply not secure enough.
  • Upgrade when the break-in showed you that your current hardware was a weak point.

Learn more about our lock change service in Toronto and general lock repair service.

How to Make Your Door Stronger After a Break-In

Repairing the damage puts you back where you were. Reinforcing the door makes it much harder to break in next time. These are the upgrades we recommend most often.

1. Reinforce the strike and frame

A heavy-duty strike plate with 3-inch screws into the stud is one of the best value upgrades you can make. Full-length frame reinforcement kits go further by spreading the force of a kick along the frame.

2. Install a quality deadbolt

Choose a deadbolt with a solid one-inch throw and a hardened bolt. Higher security cylinders resist picking, bumping and snapping.

3. Secure the hinges

On outswinging doors, the hinge pins are on the outside. Security pins or hinge studs stop the door being lifted out even if the pins are removed. On any door, longer hinge screws help resist kicks.

4. Upgrade glass near the lock

Security film or laminated glass can slow down an attacker who tries to break the glass and reach in.

5. Add access control or cameras for businesses

For commercial properties, keyless access control and cameras add another layer. See our pages on access control systems in Toronto and security camera installation.

6. Control your keys

Know who has keys. For businesses and rental buildings, a master key system with restricted keys makes it much harder for copies to be made without permission. Our rekey and master key service explains how this works.

Lock replacement after burglary in Toronto
Replacing damaged lock hardware with stronger components.

Temporary Security When the Door Cannot Be Fixed Right Away

Sometimes a door or frame is too damaged for an immediate permanent repair, or a special part needs to be ordered. In those cases, the priority is to make the property secure tonight. Options include installing a temporary lock, adding a surface-mounted bolt, reinforcing the frame with temporary blocking, or boarding up broken glass. Once the property is secure, we schedule the permanent repair.

Break-In Lock Repair for Homes, Condos and Businesses

Houses and semis

Front and back doors are the main targets, especially back doors that face a lane or a yard where an intruder cannot be seen. Our residential locksmith service in Toronto covers front, side, back and garage entry doors.

Condos and apartments

Suite doors in condos are often steel doors in steel frames, so kick-ins are less common, but cylinders and latches can still be attacked. Many buildings have rules about lock hardware, so check with management before upgrading.

Stores, offices and restaurants

Businesses need a fast fix to reopen. We repair storefront locks, back door deadbolts, panic hardware and padlocks. Visit our commercial locksmith page or call for 24-hour locksmith service.

Signs Someone Tried to Break In (Even If They Failed)

Not every attempt succeeds, and failed attempts often go unnoticed until the lock starts acting up. Check your doors if you notice any of these:

  • Fresh scratches or tool marks around the keyhole or on the cylinder face.
  • A key that suddenly feels stiff or will not go in all the way.
  • Dents or pry marks on the door edge or frame near the latch.
  • A strike plate that looks bent or a frame with new cracks.
  • A door that no longer closes or latches the way it used to.

A failed attempt is a warning. Damaged parts are weaker the second time, so have the lock and frame checked and repaired before someone tries again.

Areas We Serve

We provide break-in lock repair and lock changes across Toronto and the GTA, including North York, Scarborough, Etobicoke, Vaughan, Richmond Hill, Mississauga and Brampton. You can also find us on our Markham locksmith, Thornhill locksmith, Scarborough locksmith, North York locksmith and Etobicoke locksmith pages.

Door and lock repair after break in GTA
Door and lock repair for homes across the GTA.

Frequently Asked Questions

Can a locksmith fix my lock the same day after a break-in?

In most cases, yes. We carry common deadbolts, cylinders and strike plates so most residential break-in lock repairs are completed on the first visit. If a special part is needed, we secure the door temporarily first.

Should I change my locks if my keys were stolen?

Yes. If keys were taken, rekey or change the locks as soon as possible, even if the locks were not damaged.

Will my insurance cover break-in lock repair?

Many home and business policies cover damage from a break-in, but coverage varies. Take photos, get a police report number and ask your insurer what they need. We can provide an invoice describing the work.

What is the most secure lock for a Toronto front door?

A quality deadbolt with a high security cylinder, installed with a reinforced strike plate and long screws into the frame, is a strong setup for most homes. The frame reinforcement is just as important as the lock.

My door still locks but the frame is cracked. Is that a problem?

Yes. A cracked frame can give way easily on the next attempt. The frame should be repaired or reinforced and the strike replaced.

Do you repair commercial locks after a break-in?

Yes. We repair and replace storefront locks, mortise locks, exit devices, padlocks and access control hardware for businesses across the GTA.

Call Xpress Locksmith for Break-In Lock Repair

If your home or business has been broken into, you do not need to wait until morning to make it secure. Call (416) 848-1109 for emergency locksmith service, emergency door unlocking or a full lock change. Explore all of our locksmith services, our residential locksmith options, safe unlocking, or visit the Toronto locksmith and locksmith Toronto pages. You can also reach us through our contact page or return to the Xpress Locksmith homepage.

Toronto break-in lock repair: (416) 848-1109